|
Waco Bi-Plane |
|
|
|
Now in EPO foam with added scale detail and a 2.4GHz radio system
We improved and updated our already popular all molded foam Ready-To-Fly Waco biplane again.
The airplane is now molded in tough EPO foam, the wings still have simulated scale rib spacing and corrugated ailerons, even the fuel tanks are represented on the top of the upper wing.
The fuselage has been improved dramatically as well, the scale longerons are visible as well as other scale details and both cockpits have improved detail, 2 pilot figures are included.
Comes complete with brushless OUTRUNNER motor and speed controller, 2.4GHz 4-channel radio, 3 servos, scale propeller with scale prop nut.
The 3-cell Lithium Polymer battery's capacity is 1500mAh for long flight times and a LiPo Balance Charger is included (requires 12 volt battery or power supply).
Airplane is pre-painted with decals pre-applied. Assembly requires a Phillips screwdriver, 1.5mm Allen wrench and about an hour of time.
|
|
|
|
|
|
| |
Specifications |
|
- Wingspan: 39.0 in
- Overall Length: 31.0 in
- Wing Area: 503.7 sq in
- Flying Weight: 28.0 oz
|
- Pre-painted Fuselage (EPO molded foam)
- Landing Gear and Wheels
- Pre-painted Wings with Scale Rib Detail and Corrugated Ailerons
- Wing N-Struts and Fuselage Cabanes
- Pre-painted Vertical Tail
- Pre-painted Horizontal Tail
- Pushrods (pre-installed)
- 4-Channel 2.4GHz Transmitter and Receiver (pre-installed)
- 3-Cell 1500mAh LiPoly Battery
- Brushless 2830 Outrunner Motor (900Kv)
- Brushless Electronic Speed Control (20A)
- LiPoly Balance Charger
- Scale Propeller and prop nut
- Miscellaneous Hardware
|
|
|
|
|
|
